Liling Products (Click to select category)

LNZ-W50Nm microcomputer controlled torsion testing machine

The microcomputer controlled torsion testing machine is mainly used for the testing of hardware torsion, components, raw materials, semi-finished components, finished products, and components.

+8618660398828

lilingshiyanji@163.com

Introduction

The microcomputer controlled torsion testing machine is mainly used for the testing of hardware torsion, components, raw materials, semi-finished components, finished products, and components.
The tested sample is installed between fixtures with adjustable space, which can adapt to different tests on the torsional mechanical properties of the tested sample. The testing machine adopts computer-controlled operation and can collect data such as torque, peak value, angle, curve, etc; The monitor displays the torque time, torsion angle time, and torque torsion angle test curves of the tested component; It can achieve the storage, copying, and printing of experimental data reports.

Parameters

No.	Item	Specification
1	Type	Horizontal
2	Maximum Testing Force	±50 Nm
3	Testing Force Resolution	0.01 Nm
4	Torsion Fixture	One set of M6 bolt clamping fixture; One set of clamping fixture for screw and convex rod
5	Test Stroke	500 mm
6	Torsion Speed Control Range	0.1°/min ~ 720°/min, continuously adjustable
7	Protection Function	Overload protection
8	Power Supply	220 V, 750 W, 50 Hz
9	Overall Dimensions (approx.)	1200 * 430 * 460 mm (LWH)
10	Equipment Weight (approx.)	175 KG