- Dynamic fatigue testing machine
- Friction and wear testing machine
- Fastener special testing machine
- Static mechanical property testing machine
- In-situ tensile testing machine
- Non-standard customized large and small mechanical equipment
- Metallographic sample preparation and analysis equipment
- hardmeter
- Solution of overall design and planning of laboratory
LSTH-20 Microcomputer-controlled dynamometer for shock absorber
LSTH series microcomputer-controlled on-line dynamometer for shock absorber is mainly used for dynamic and static tests such as dynamometer, speed, fatigue life, damping and friction of cylinder shock absorber and spring used in cars, special vehicles, armored vehicles, electric vehicles, motorcycles and other motor vehicles, and it is a testing machine with high cost performance.
Introduction
The maximum speed of the dynamometer of this shock absorber is 1m/s, and the speed parameters can be set at will below this speed.
Parameters
|
No. |
Item |
Technical Parameters |
|
1 |
Maximum Test Force (KN) |
20KN |
|
2 |
Test Frequency |
0.5~2Hz |
|
3 |
Maximum Test Stroke |
100mm |
|
4 |
Maximum Linear Speed for Work Diagram Test |
1m/s |
|
5 |
Sensor Test Accuracy |
±0.5%FS |
|
6 |
Counter Capacity |
9 * 10^9 |
|
7 |
Counting Stop Accuracy |
±1 |
|
8 |
Maximum Outer Diameter of Specimen |
Φ150mm (Customizable Fixture) |
|
9 |
Installation Station |
1 Set |
|
10 |
Maximum Sample Length |
1000mm (Customizable) |
|
11 |
Power Supply Voltage (Three-phase Four-wire System) |
220V/380VAC 50Hz |
|
12 |
Main Motor Power |
15 kW |
About LiLing
Product range
News
Contact LiLing
Address：山东省济南市市中区魏华西路6号院内2号厂房
Business consultation (WeChat)
