What are the conventional functions of microcomputer-controlled torsion testing machine?

Introduction to general functions:

(1) This software consists of dynamic communication, speed control, parameter input, data processing, result observation, record query, chart display, chart printing, data saving and other functional modules.

(2) The test methods are diversified, and the torque of the material can be set and the torsion angle of the material can be detected; The torsion angle of the material can also be set, and the whole test process of torque detection is automated.

(3) Automatic shutdown due to overload to protect the sensor from damage.

The specific functions are as follows:

(1) Automatic reset: reset the test force and angle at any time as required;
⑵ Automatic shift: automatically switch the appropriate range to ensure the measurement accuracy of the load;
⑶ Automatic calibration: it can automatically calibrate the accuracy of test force indication;
A) Set the test torque τ and detect the twist angle ω of the material.
B) Set the twist angle ω, and detect the test torque tau of the material.
C) Be able to check the progress and return curve of the whole test process;

D) Whether the sample is qualified can be automatically judged by setting the upper and lower limits;
E) Up to ten inspection points can be set (inbound and outbound inspection can be set).
F) The deformation caused by the sensor can be compensated. That is, the deformation caused by the stiffness of the sensor and the whole machine does not affect the accuracy of the angle.

(4) It has the functions of overload automatic stop, overcurrent and overvoltage protection;
Microcomputer-controlled torsional testing machine is mainly used for testing the torsional mechanical properties of metal materials, bolts, tools, finished products, structural parts, transmission shafts and other automobile parts at room temperature or under special environment, and can also be used for testing the torsional failure of nonmetallic materials and finished products. The tested sample is installed between fixtures with adjustable space, which can adapt to the test of torsional mechanical properties of different tested samples.
Implementation standards: GB/T 10128 Room Temperature Torsion Test Method for Metallic Materials, JJG 269 Verification Regulation for Torsion Testing Machine, etc.
Application industries: metrology and quality inspection, metallurgical steel, machinery manufacturing, auto parts, universities, scientific research laboratories, commodity inspection and arbitration, technical supervision departments, building materials and ceramics and other industries.